Hey all,
Recently I've been having issues with the brakes on my 2001 FW trailer for my Horizon 180. There doesn't seem to be enough pressure getting to the calipers resulting in not enough pressure on the pads. I can't get any brake fluid to come out the top bleed screw on the caliper however it does come out the bottom screw. I'm using a ratchet strap to pull on the coupler to bleed them.
I'm wondering what this nut is used to adjust as the brakes seem to work better after tightening it some?
http://imgur.com/a/OG7KbAnyone have any suggestions as to what else I should check?
Thanks!