| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Bearings and seals part numbers https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=23623 |
Page 1 of 1 |
| Author: | theoldwizard1 [ Tue Oct 20, 2020 9:12 pm ] |
| Post subject: | Bearings and seals part numbers |
1999 Four Winns trailer, single axle, carrying a Horizon 200 |
|
| Author: | zims1993 [ Thu Oct 22, 2020 12:22 pm ] |
| Post subject: | Re: Bearings and seals part numbers |
If you go to fourwinns.com and under owners you can enter your trailer number and will help with the bearings. If not just remove a hub and the bearing and race will the part number etched to them. Same with seal, or may just have to measure to verify. |
|
| Author: | kmack [ Wed Nov 11, 2020 1:53 pm ] |
| Post subject: | Re: Bearings and seals part numbers |
Or go to a trailer-specific company and they can help get you the correct bearings. You most likely have a 6-lug hub with your trailer being a single axle and carrying an H200. I have an H180 with a 6-lug single axle trailer. The 6-lug hubs (heavier axle load) are quite different than the standard 5-lug bearings that every Academy, WalMart, Autozone, etc. seem to carry. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|