www.iFourWinns.com

Anyone know a good place to get them? I am repacking my wheel bearings and checked every parts supplier in the area with no luck. Part number on it is a 22333. Advance Auto could order them, Napa and Auto Zone could not even come up with that number. Some how I think I may have to go to the dealer for some stupid seals. Gonna check a bearing house with deal with through work tomorrow, but wanted to get the job done today.

The Victor part number is 47017 and Federal Mogul is 412920 if this helps anyone looking for the same seals. THe OEM seal is made by Trans Com and no one local carries it. I could have got it in a few days through a bearing house we deal with through work, but I wanted to get the job done.

_________________
1998 Baja Boss 252 7.4L MPI Bravo 1 (SOLD)
2007 FW H200SS 5.0GXI (Sold)
2004 Chevy Silverado 2500 Crew 6.0L (tow vehicle)
1991 FW 170 Freedom 4.3L (SOLD)

No trailer shops around Oshkosh?

I've got some spares I could send you, but am not 100% sure they're still the right ones for your trailer. They're a Peer #POS2253337TBN.

_________________


Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic

I would say that is your best bet. They probably know what you need w/o a part number...

_________________
Rob

Present: 1999 Formula 280SS
Past: 1989 180 Horizon

http://www.robcamerondesign.com

There are a few trailer shops around, but no one open on Saturday night or Sunday at all. I'm sure I can locate them tomorrow, but was supprised after an extensive internet search I came up empty.

_________________
1998 Baja Boss 252 7.4L MPI Bravo 1 (SOLD)
2007 FW H200SS 5.0GXI (Sold)
2004 Chevy Silverado 2500 Crew 6.0L (tow vehicle)
1991 FW 170 Freedom 4.3L (SOLD)

If all else fails, Tom's Trailers in Menominee Falls. If he won't ship to you, let me know and I'll pick them up and throw it in the mail.

_________________
-Rob.


Current boat: 2011 Yamaha AR210
Previous boat: 1998 Horizon RX 4.3GL SX

Thanks. I'll get back to you after doing some more searching today as everyone is open again now.

_________________
1998 Baja Boss 252 7.4L MPI Bravo 1 (SOLD)
2007 FW H200SS 5.0GXI (Sold)
2004 Chevy Silverado 2500 Crew 6.0L (tow vehicle)
1991 FW 170 Freedom 4.3L (SOLD)

Surprise surprise Skipper Buds does not even stock them. This must mean they never repack wheel bearings?? I find that odd. Anyway I found some at a local parts store, but man that an expensive seal! Almost $26.00 ea. and they are not even the rubber coated ones like I pulled out, but they are the correct size so i put them in.

_________________
1998 Baja Boss 252 7.4L MPI Bravo 1 (SOLD)
2007 FW H200SS 5.0GXI (Sold)
2004 Chevy Silverado 2500 Crew 6.0L (tow vehicle)
1991 FW 170 Freedom 4.3L (SOLD)

That's one pricey seal, but at least you were able to find them. I'm not surprised that the Oshkosh Skipper Buds sent you elsewhere, the local Skipper Buds is who referred me to Tom's Trailers and said they farm out any trailer work. I'm pretty sure the seals should be under $10 (maybe under $5) with the springs. If you want to have spares, it may be worth checking out.

_________________
-Rob.


Current boat: 2011 Yamaha AR210
Previous boat: 1998 Horizon RX 4.3GL SX

WTH?? I think I pay around $5 for them. Double lipped, spring reinforced.

_________________


Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic

I am going to do some more shopping around because I know I will need them again next year. I repack the bearings every spring. Napa wanted $28.55 ea. Going to do some more research and find a better deal I hope.

_________________
1998 Baja Boss 252 7.4L MPI Bravo 1 (SOLD)
2007 FW H200SS 5.0GXI (Sold)
2004 Chevy Silverado 2500 Crew 6.0L (tow vehicle)
1991 FW 170 Freedom 4.3L (SOLD)

http://www.championtrailers.com/bearing ... seals.html

Check out their part #3066. Those are identical to the ones I buy locally for about the same price. Might be a good source when you aren't in a hurry for them.

_________________


Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic

Thanks for the info. I'm sure I could have found them some where else for cheaper, but I guess that what I get for being in a hurry. Also hard to order seals ahead of time until you know what you need. So now in the future at least I know what I am looking for. Going to keep one original on hand and also part number I got from the new one and do some shopping around.

_________________
1998 Baja Boss 252 7.4L MPI Bravo 1 (SOLD)
2007 FW H200SS 5.0GXI (Sold)
2004 Chevy Silverado 2500 Crew 6.0L (tow vehicle)
1991 FW 170 Freedom 4.3L (SOLD)

I just ordered a bearing set from abctrailerparts. I had the same issue with trying to find one locally (Madison) for a reasonable price. I ordered the entire bearing kit for $35 shipped.

The ones they carry don't look like they would work for me either.

_________________
1998 Baja Boss 252 7.4L MPI Bravo 1 (SOLD)
2007 FW H200SS 5.0GXI (Sold)
2004 Chevy Silverado 2500 Crew 6.0L (tow vehicle)
1991 FW 170 Freedom 4.3L (SOLD)

I hate to be captain obvious in this situation....but have you called Winnisquam or any other Four Winns dealer?

_________________
Current Boat:
2004 Sea Ray 320 Sundancer "Nauti Luvin'"

Previous Boats:
1999 298 Vista "Seas The Day"
2008 H200SS "Nauti Luv"
2006 Tahoe Q4