| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| How to access surge brake reservoir? https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=4050 |
Page 1 of 1 |
| Author: | jacknbella [ Tue Jul 14, 2009 10:33 am ] |
| Post subject: | How to access surge brake reservoir? |
I discovered my surge brake reservoir is leaking Dot3 brake fluid but I cannot seem to get underneath to take a look to find and resolve the problem. Any advice? |
|
| Author: | 07H200SS [ Tue Jul 14, 2009 11:57 am ] |
| Post subject: | Re: How to access surge brake reservoir? |
Aren't you under warranty yet? Take it in. |
|
| Author: | jacknbella [ Tue Jul 14, 2009 12:21 pm ] |
| Post subject: | Re: How to access surge brake reservoir? |
Yep, still under warranty, however, the nearest FW's dealer is 3-4 hours away so I'd like to repair it myself if at all possible. |
|
| Author: | 230 Mike [ Tue Jul 14, 2009 11:07 pm ] |
| Post subject: | Re: How to access surge brake reservoir? |
Don't you just have a black plastic cap on top of the tongue? Pop that off, and you'll see the actual master cylinder cap underneath. Something tells me I'm not understanding the question. Note, DOT3 will wrinkle and ruin any trailer paint it touches, almost instantly. |
|
| Author: | yrless11 [ Wed Jul 15, 2009 5:48 pm ] |
| Post subject: | Re: How to access surge brake reservoir? |
I'll try not to derail too much here....on my trailer, there is a black cap that looks like you can use either a large socket or big crescent wrench to remove to access the brake fluid. I have put some effort into trying to remove this with no success. Is this a pop-off cap? Just wondering how it is to be accessed. Note that I have the detachable tounge trailer with the Titan surge brake head. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|