www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Size of stripe on trailer
https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=4803
Page 1 of 1

Author:  PDACPA [ Tue Nov 10, 2009 3:37 pm ]
Post subject:  Size of stripe on trailer

I am replacing the stripe on my trailer. Does anyone know how thick the stripe is on their trailer? Some Four Winns have two stripes and others have one. Either sizes is fine. I am just trying to clean up the look of my old trailer.

Thanks.

Author:  Y-Guy [ Tue Nov 10, 2009 11:51 pm ]
Post subject:  Re: Size of stripe on trailer

For what it's worth I have two stripes appear to be about 3/8" each. One white, one grey.
Image

Author:  230 Mike [ Wed Nov 11, 2009 1:32 am ]
Post subject:  Re: Size of stripe on trailer

I just bought a roll of that stripe from FW. It's actually one tape with the two stripes in it with clear in between. Mine's the same as what Y-Guy posted and is Four Winns #005-1165.

Author:  PDACPA [ Wed Nov 11, 2009 7:08 am ]
Post subject:  Re: Size of stripe on trailer

Thanks guys! I looked at Four Winn's site and all parts say call dealer. Is that where you bought yours Mike?

Author:  230 Mike [ Wed Nov 11, 2009 11:48 am ]
Post subject:  Re: Size of stripe on trailer

I called Winnisquam who had it drop shipped from FW. It did take several phone calls but the stripe is "correct" and is pretty inexpensive. I think I bought 25' of it just to have on hand.

Author:  PDACPA [ Wed Nov 11, 2009 3:20 pm ]
Post subject:  Re: Size of stripe on trailer

Great guys at Winnisquam. I am in FL and they are in NH and wondered why I was calling and not my local guy. Said they do not return calls and the ifourwinns guys are happy with them.

Four Winns does not make the dark blue (midnight blue) of my boat in the stripes. So back to looking, but thanks for the measurements and I did get some parts from Winisquam.

Author:  Y-Guy [ Wed Nov 11, 2009 6:15 pm ]
Post subject:  Re: Size of stripe on trailer

Should be able to find something on the automotive detailing websites I'd think.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/