www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Bow Rollers
https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=6566		 Page 1 of 1
Author:  crzymk [ Mon Sep 06, 2010 5:06 pm ]
Post subject:  Bow Rollers
Looking at replacing my FourWinns crap bow rollers on my trailer. They Measure 8" across anyone have any good suggetions as to a AWESOME brand or site to get them at???
Author:  french829 [ Tue Sep 07, 2010 8:02 am ]
Post subject:  Re: Bow Rollers
+1 Same question. I noticed the last 2 times out that my rollers all of a sudden are getting really torn up and getting residue all over the bow when I crank the boat up.
Author:  firecadet613 [ Tue Sep 07, 2010 8:10 am ]
Post subject:  Re: Bow Rollers
I believe I picked mine up from Wholesale Marine. http://www.wholesalemarine.com although any marine supply house will carry them.
Author:  JDW250 [ Tue Sep 07, 2010 7:54 pm ]
Post subject:  Re: Bow Rollers
Mine are starting to get pretty ugly as well. I bought a full bow roller assembly (two large outside portions with 4" middle roller and the bolt) from Overton's. I didn't like the outside portions of the one's from Overton's as they seemed extremely rigid compared to mine and had a different diameter & shape. I'm thought they might flatten my anchor locker drain so I didn't put in on. I was at my local marina the other day and saw they were selling roller odds & ends and found some to match my middle section rollers for $6/each. I picked up two and plan on putting them on next time I get the boat out. This will let me change out the bad pieces for relatively cheap as compared to replacing the whole roller assembly. I doubt these are "AWESOME" rollers, but you may want to check with your local marina to see if they are cleaning house on spares. Hopefully I can still return the Overton's bow roller assembly. If not, I'm sure it will fit one of my buddy's boats.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/