www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Tie Down Calipers https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=8436 |
Page 1 of 1 |
Author: | k12chaser [ Wed Sep 28, 2011 3:01 am ] |
Post subject: | Tie Down Calipers |
Hi, I have a 2005 FW 210 Horizon with four disc brake trailer. The brake caliper pistons were seized and the seals were trashed. They are Tie Down calipers and master cylinder. I have cleaned up and rebuilt the master cylinder and all the calipers/pistons but I'm having trouble finding replcement seals. Although they look OK I would still like to replace seals in the master cylinder but the caliper seals have to be replaced. I found the piston boots are identical to Kodiak but the piston seals are impossible to find. can anyone help? Cheers K12 |
Author: | blue dragon [ Wed Sep 28, 2011 11:32 am ] |
Post subject: | Re: Tie Down Calipers |
Did you contact tiedown to see if they could provide you with a source for the seals? |
Author: | EvilZ [ Wed Sep 28, 2011 12:08 pm ] |
Post subject: | Re: Tie Down Calipers |
Champion Trailers is usually a pretty decent source for this type of stuff. http://www.championtrailers.com |
Author: | DaleG [ Mon Oct 03, 2011 9:38 am ] |
Post subject: | Re: Tie Down Calipers |
I had Tie-Down brand with the earlier solid rotors (not the newer vented rotor so I do not know about the calipers on those) I had the pistons freeze up within a year of saltwater uses. My solution was to switch to the Kodaik brand after getting no assistance on reasons or solutions from Tie-Down --Now after five years of salt water use ---I have had no NO problems wth the Kodaik brakes and we use the boat very frequently in Florida -- we also use the brakes a lot as evidenced by a recent tow of 13 hours each way. I feel they are superior to Tie-Down -- and a few other people feel the same way. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |