www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
H200 brake fluid dust cover https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=9407 |
Page 1 of 1 |
Author: | skidaddytn [ Tue May 29, 2012 3:15 pm ] |
Post subject: | H200 brake fluid dust cover |
ok.. this is the second time my brake fluid plastic dust cover has jumped off and ran away from the trailer tongue... I guess I need to buy a 6 pack of these? The last time I looked, I could find nowhere to buy them and was able to get one free from the nice folks at tie-down when I called them... anyone else lose theirs? |
Author: | Jafo4U [ Wed May 30, 2012 1:07 pm ] |
Post subject: | Re: H200 brake fluid dust cover |
Mine screws in. |
Author: | Aussie_Horizon_190 [ Wed May 30, 2012 7:03 pm ] |
Post subject: | Re: H200 brake fluid dust cover |
I'm assuming you mean the plastic cover on the tongue you have to remove to unscrew the reservoir cap.... Maybe an option is to see if you can get a rubber grommet the right size if you don't want to use the plastic cover again. You know, the type they use to plug firewall holes on cars. |
Author: | skidaddytn [ Thu May 31, 2012 12:34 pm ] |
Post subject: | Re: H200 brake fluid dust cover |
Yes, the dust cover, not the screw cap for the reservoir... Hmm, never thought about a grommet, but don't those have holes in them for wires to go through? i would need a piece like a grommet around the edges with no hole through the middle... hmmm... I guess I can check McMaster's web site to see if they have something like that... |
Author: | 90Tiger [ Thu Jun 28, 2012 1:24 pm ] |
Post subject: | Re: H200 brake fluid dust cover |
Is this what you are looking for? http://www.trailerpartsdepot.com/itemdesc.asp?ic=48759&eq=&Tp= |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |