| 
			
				
					|  |  
					| email admin your custom rank |  Joined: Sat Nov 24, 2012 9:49 am
 Posts: 352
 Location: Lititz, PA
 | 
				
					| Happened to me once right after I bought my boat.  On mine, the cover over the base of the shifter is removable.  There is a large, nut which holds the shifter lever in place over the spline.  The nut had worked itself loose and simply needed to be tightened.  I should have known it needed to be tightened when I bought the boat because there was a little in/out "play" in the shifter handle.  Hopefully it will be that simple for you too. _________________ Seth   2005 210 Horizon 5.0L GXi "Don't Think Twice"
 
 |  |