| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 1984 marquise 160 trim issue https://www.smwebhead.com/phpBB3/viewtopic.php?f=13&t=10583 |
Page 1 of 1 |
| Author: | mymarq160 [ Wed Nov 07, 2012 4:40 pm ] |
| Post subject: | 1984 marquise 160 trim issue |
I am pretty sure i know what my problem is just wanted to get some 2nd and 3rd opinions. So I just got my boat a few weeks ago and everything worked but the trim up on the switch, when i tested the boat he told me that and he just used the trailer button. In my drive way I was able to trim up and down this way no problem. We got to the river and launched for the first time. Had a great time!! Then realized the trailer button was not triming the drive up anymore. When we got back to the ramp i tried to pull out but the drive was draging so i had to stop. Some other boaters came to help. We figured jumping the solenoid worked to get it back up. Now here comes the question. Do you think it is a bad solenoid or switch or both? I am thinking both. When I hit the button the solenoid just clicks. What do you think? Thanks all |
|
| Author: | jvthundercat [ Wed Nov 07, 2012 6:51 pm ] |
| Post subject: | Re: 1984 marquise 160 trim issue |
Replace the solenoid and clean the switches. With a solenoid going bad, it showed the trim switch wiring was a little less then 100% contact, then it went out. |
|
| Author: | rpengr [ Thu Nov 08, 2012 1:02 pm ] |
| Post subject: | Re: 1984 marquise 160 trim issue |
mymarq160 wrote: . Do you think it is a bad solenoid or switch or both? I am thinking both. When I hit the button the solenoid just clicks. If you hear the solenoid click, then the button is fine. So it must be the Solenoid (or the cable/connections, or the motor). |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|