www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

1989 Liberator 201
https://www.smwebhead.com/phpBB3/viewtopic.php?f=13&t=13027		 Page 1 of 1
Author:  Liberator One [ Sun Jun 15, 2014 5:21 pm ]
Post subject:  1989 Liberator 201
Hey all,

New to the forum. Was just given a 1989 Liberator 201 with a SB 350. It's in good shape but needs a little minor work. Was wondering if anyone had any good sources on where I could find any manuals/information about the boat?

Thanks :D

Image

Image

Image

Image

Image

Image

After the major clean...

Image

Image

Image

Image
Author:  LouC [ Sun Jun 15, 2014 6:14 pm ]
Post subject:  Re: 1989 Liberator 201
The boat looks great!
All you have to do is replace the screw fitting in the side of the Cobra drive and prime & paint it. Any Cobra questions ask away I've had one for 12 years. The hull design on the Lib is the same as on my H-200. It's an excellent riding boat. 21* dead rise a true deep v hull.
As far as manuals you want to find an OMC shop manual; there was a guy selling reprints on eBay. It'd worth trying to find this because it's much better than the aftermarket ones.
On the FW website under customer service the may still have owners manuals and wiring diagrams for these boats...
Author:  john55c [ Sun Jun 15, 2014 8:40 pm ]
Post subject:  Re: 1989 Liberator 201
Boat looks great, congrats! I bought the omc manual from the website below and it is great. They are the original manuals which is the best part. The seloc and others are more generic. Good luck! My first stern drive and so far working on it has been easy. Enjoy!

http://www.marineengine.com/manuals/omc ... index.html
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/