 |
email admin your custom rank |
Joined: Sat Nov 24, 2012 9:49 am Posts: 352 Location: Lititz, PA
|
Happened to me once right after I bought my boat. On mine, the cover over the base of the shifter is removable. There is a large, nut which holds the shifter lever in place over the spline. The nut had worked itself loose and simply needed to be tightened. I should have known it needed to be tightened when I bought the boat because there was a little in/out "play" in the shifter handle. Hopefully it will be that simple for you too.
_________________ Seth   2005 210 Horizon 5.0L GXi "Don't Think Twice"
|
|