www.iFourWinns.com

Yeah, being the fish and ski version, the seats and cushions had seen alot of fish hooks. The off season i am redecking and going to fiberglass the whole deck getting rid of the carpet. To much of a water retainer and will be easier to clean because of our Oklahoma red dirt lakes. I have never seen a closed bow version of a Freedom, very nice. Yours is in excellent condition.

Thanks
I seem to be hearing that alot......about the closed bow. I didn't know that it was so unique.

Got her out again and have some pics, this is still breaking in new engine so double oil and smokey but so happy she is running.





looking to re-deck it this winter and redo the back seats, want to make a nice bench seat in the back any one have any pictures of thier seats.

This year I will add a Bimini top. This is is the before picture. The "after" picture is following. I bought the top from iboats.com and I was really impressed with the quality of the product. The stainless steel supports was difficult to work with, but well worth the effort.
The bottom photo gives you an idea of how the rear seats are configured on my boat, although it is an I/O.

Great pics, I am going to switch our the passenger side bucket with a set of back to back and make a bench along the back, working out the details right now. I am looking for one of those convertible bimini tops, the one that snaps to the windshield and just covers the driver and passenger.

I have a 92 180 Freedom that I bought a couple seasons ago. Good boats, mine was in great shape. "Upgrade" from an 89 150 freedom. Got the 3.0L, doesn't go real fast, but it gets me there...

great pics, great looking boat. looks very clean.

I like the look of your boat cobramike. It is in really good condition.
I now have a better idea of where I should position my bimini top when I install it. Are you happy with it's placement?
I also notice that your glovebox and dashboard are different than mine. Are they aftermarket?

Well got some work done, Had the bow seating redone, also had a bench seat made for the back. Wet sanded, then compounded then Finesse It II and finally some wax, looking better now. Question, has anyone used the 3M stripe removal tools, the green and black stripe are all tore up and I would like to remove them.
here are some pics.

Looking pretty good.
Heat gun, a plastic scrapper and some Goo-gone for the stripes.
Even if you use the rubber tool, you will need the Goo-gone.

_________________
1992 Baja 38 Special Twin 502 Mags

03 Stingray 3.0
88 261 Liberator 460 King Cobras
95 Bayliner 1850 3.0
77 Fiber Form 20ft 350/385hp
70 Wescraft 1800 SS 455 Jet

Lead, Follow, or get the Hell out of the Way!

As far as I know the dash and everything is stock. It is a 92 however, I believe your's was a 93.