| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 1988 Liberator 201 cuddy doors https://www.smwebhead.com/phpBB3/viewtopic.php?f=13&t=5198 |
Page 1 of 1 |
| Author: | Ironwill [ Wed Mar 10, 2010 2:36 pm ] |
| Post subject: | 1988 Liberator 201 cuddy doors |
Hello fellow boaters. I recently purchased a 1988 Four Winns Liberator 201. I am currently in the process of going over the boat getting it back to 100%. The main thing I need for the boat are the cuddy doors and the hatch ( 3 piece set). I can no longer get anything from Four Winns. I have not had any luck with salvage yards either. does anyone know where I can get a set or at least the demensions so i can build a new set. I know the originals were Plexiglas or acrylic. I know that the doors will work off of a1988-1993 Liberator 201 or a 1988-1993 Sundowner 205. I would greatly appreciate any help I can get. Thank You. |
|
| Author: | Tamelesstgr [ Fri Apr 30, 2010 12:52 pm ] |
| Post subject: | Re: 1988 Liberator 201 cuddy doors |
Found some interior parts and wood on a local Craigslist ad, maybe this is what you are looking for? http://chicago.craigslist.org/nwc/boa/1708151016.html Ken |
|
| Author: | jvthundercat [ Sat May 08, 2010 6:01 am ] |
| Post subject: | Re: 1988 Liberator 201 cuddy doors |
I am looking for the same thing for my 261 Liberator. That ad from your link is gone. If nothing else, I've got to get the dimensions so I can build one. |
|
| Author: | Climb400 [ Sun Mar 04, 2012 11:48 am ] |
| Post subject: | Re: 1988 Liberator 201 cuddy doors |
I have a 1990 201 liberator and looking for the doors. Anyone out there have measurements, photos or interest in making them? |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|