www.iFourWinns.com

Hi,
I'm looking for suggestions for a great polymer sealant to use on my gel coat boat. After doing alot of research, it appears that most people are turning over to polymer sealants instead of wax. I will be applying with a Porter Cable 7424XP DA polisher. What is your favorite polymer sealant? Also, what type of cleaner/polish do you use before applying your sealant. Thanks, Ray

_________________
Ray & Paula
2006 Four Winns 244 Funship

http://forums.iboats.com/boat-topics-qu ... 98257.html

I agree with Bubba. Never found a need for a sealant.
What is you're favorite

_________________
2005 H200

If it isn't UV-blocking, it should not go on your boat. And carnauba is a big no-no on boats.

There isn't that much that's new under the sun. Pick a good quality UV-blocking marine wax and go for it.

_________________


Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic

I just picked this up from on of our vendors. Going to give it a try this weekend and I'll report back, but I think the real results won't be know for months. It has UV blockers in it.
http://www.prowax.com/P-Series/P-63_P_PolyGard_Sealant.html

_________________
Our Boating Blog: http://ben-dana.blogspot.com/

2005 268 Vista "Sea Pickle II"
1979 AMF Alcort Puffer
Previous:
2003 FW190 Horizon
1973 Startcraft 18ft "Sea Pickle"

Hi,
After intensive searching along with reviews, I decided to give Shurhold's Yacht Brite Pro Polish a try. Contacted them in which they stated that it is indeed a sealant. I have'nt read anything negative on this sealant. Many detailers will state that a sealant out performs wax due to sealing the pores of gelcoat and or painted surfaces instead of just giving it a top coat of wax. Thanks for all the replies, Ray

_________________
Ray & Paula
2006 Four Winns 244 Funship