| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| What's Your Favorite Polymer Sealant? https://www.smwebhead.com/phpBB3/viewtopic.php?f=14&t=11165 |
Page 1 of 1 |
| Author: | rapa123 [ Wed Apr 10, 2013 12:45 pm ] |
| Post subject: | What's Your Favorite Polymer Sealant? |
Hi,  I'm looking for suggestions for a great polymer sealant to use on my gel coat boat. After doing alot of research, it appears that most people are turning over to polymer sealants instead of wax. I will be applying with a Porter Cable 7424XP DA polisher. What is your favorite polymer sealant? Also, what type of cleaner/polish do you use before applying your sealant. Thanks, Ray
|
|
| Author: | afw200 [ Wed Apr 10, 2013 1:04 pm ] |
| Post subject: | Re: What's Your Favorite Polymer Sealant? |
http://forums.iboats.com/boat-topics-qu ... 98257.html I agree with Bubba. Never found a need for a sealant. What is you're favorite 
|
|
| Author: | 230 Mike [ Thu Apr 11, 2013 6:47 pm ] |
| Post subject: | Re: What's Your Favorite Polymer Sealant? |
If it isn't UV-blocking, it should not go on your boat. And carnauba is a big no-no on boats. There isn't that much that's new under the sun. Pick a good quality UV-blocking marine wax and go for it. |
|
| Author: | Bliss36 [ Thu Apr 25, 2013 9:26 am ] |
| Post subject: | Re: What's Your Favorite Polymer Sealant? |
I just picked this up from on of our vendors. Going to give it a try this weekend and I'll report back, but I think the real results won't be know for months. It has UV blockers in it. http://www.prowax.com/P-Series/P-63_P_PolyGard_Sealant.html |
|
| Author: | rapa123 [ Sun May 05, 2013 8:13 pm ] |
| Post subject: | Re: What's Your Favorite Polymer Sealant? |
Hi, After intensive searching along with reviews, I decided to give Shurhold's Yacht Brite Pro Polish a try. Contacted them in which they stated that it is indeed a sealant. I have'nt read anything negative on this sealant. Many detailers will state that a sealant out performs wax due to sealing the pores of gelcoat and or painted surfaces instead of just giving it a top coat of wax. Thanks for all the replies, Ray |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|