www.iFourWinns.com

Thinking about recoating the inside of the ski locker. I have some old coating chipping off and don't want
any water damage in there. Any suggestions for what would work best? Thanks!

_________________


1998 Horizon 170 QX / Volvo 3.0 SX drive

Sand back the entire area and roll on a coat of 'Flowcoat'.
Once painted, consider putting a rubber mat on the locker's floor, to protect the flowcoat.

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS

Don't like the idea of sanding in there
Will the coating not stick to the original surface once cleaned?

_________________


1998 Horizon 170 QX / Volvo 3.0 SX drive

If the existing gelcoat is chipping, you'll have to sand it.
Like painting a door, it's always a good idea to give it a sand prior to painting...

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS

If you want anything to stick to it you have to sand. If its gel coated inside then I'd stick with that, just re-gelcoat it. Sand first wipe down with solvent let dry and re-gelcoat.

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II