| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Can I covert a pump out head to a portable pull out model? https://www.smwebhead.com/phpBB3/viewtopic.php?f=14&t=3949 |
Page 1 of 1 |
| Author: | bowlboundgman [ Sun Jul 05, 2009 8:28 pm ] |
| Post subject: | Can I covert a pump out head to a portable pull out model? |
I have a f224 and we rarely use the head. To get it pumped out cost $20 and only a few places offer pump outs on the lake. I only have a 2.6 gallon holding tank. I would like to covert my pump out to a portable head with a pullout holding tank. |
|
| Author: | tennja [ Mon Jul 06, 2009 8:30 am ] |
| Post subject: | Re: Can I covert a pump out head to a portable pull out model? |
If you have the same head as I do on my 2008 this is a relatively easy modification. On my unit if you take the top part of the head off the holding and tank is all that is left. Four Winns just attaches a pump out fitting to the head manufacturers holding tank.. It easily turns off to allow you empty the tank your self by lifting it out of the head compartment. By doing it this way you won't have to get it pumped out all of the time. |
|
| Author: | bowlboundgman [ Tue Jul 07, 2009 7:04 pm ] |
| Post subject: | Re: Can I covert a pump out head to a portable pull out model? |
thanks |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|