After looking in my engine compartment for the first time since I picked up my boat, I picked it up on 4/30, I found that the one bracket on the one side that holds the piston lift was broken off the deck. The bracket is attached to the side of the deck of the compartment opening. That area has extra thickness for stress of the two pistons, one each side, that pushes the compartment door up. Some of the material behind the hole broke off. My question is this, what do I use to fill that area so I can redrill the holes to reattach the bracket?
_________________
Alexj
1995 Four Winns Horizon 190
OMC 5.0 RL
Login
FAQ
Search
