www.iFourWinns.com

I'm going to be installing a flatscreen 21" and have decided to mount it on the wall by the head. I was wondering how others mounted theirs. Did you put anything on the inside wall to mount bolts through? I can hit some rough water where I boat and don't want an unexpected rough ride ripping it off the wall leaving cracks and holes.

Thanks for the input. Oh this is a 96 258 Vista.

Eric

_________________
1996 258 Vista 5.8L Fi Cobra SX
2007 (NBS) 2500HD Ext Cab, Long Bed

I was hammering 35mph in 3ft wind chop because budweiser said so. Beat the crap out of the passengers. Boat nearly getting air. Everything everywhere in the cabin. Huge smile on my face that I will always remember, and a 24" LED flat screen TV still on the wall. Bolted to the back wall plywood with just 4 wood screws.

http://www.amazon.com/gp/product/B000VK ... UTF8&psc=1

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold
Rick's Four Winns H180 Mods/Upgrade Thread

That wall for my boat was made from 1/2" ply. I used 1/2" screws with small fender washers and it worked out fine for me. I did use a wide bracket to distribute the load.