| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 1989 160 freedom https://www.smwebhead.com/phpBB3/viewtopic.php?f=19&t=15988 |
Page 1 of 1 |
| Author: | mkay2009 [ Sat Jun 09, 2018 9:55 pm ] |
| Post subject: | 1989 160 freedom |
hello i am new to the site and this may sound noobish. but i had replaced the org radio and when all hooked up i get no sound.. does anyone have any insite on this. just tell me im doing something wrong...audio and boats to me is new, now in a car is a different story... |
|
| Author: | ThaScoobs [ Mon Jun 11, 2018 10:47 am ] |
| Post subject: | Re: 1989 160 freedom |
Its not much different than a car. You could pull out the speakers to check the colors of the wires and then compare to the back of the radio. Did the radio come with a wiring schematic explaining what each wire was for? If the unit turns on maybe it is something with wires not connected correctly. |
|
| Author: | mkay2009 [ Thu Jun 14, 2018 12:26 am ] |
| Post subject: | Re: 1989 160 freedom |
yeah i didnt think it was much different than a car. it was the old factory radio so it never has been changed. they are a 4 wire set up, left pos right pos red power and black ground..and they wire the ground all in one. thats what confused me. so when i wired all the grounds together i got no sound. so i went back to square one and tried a piggy back speaker wire to see if that worked and grounded it to the harness and grounded the ground to the old ground and it worked. so i had to re wife the speakers to get a ground for each of them so i could wire the harness right...it works great now and now i can stop talkin to myself when i take the bout out. |
|
| Author: | ThaScoobs [ Tue Jun 19, 2018 10:33 am ] |
| Post subject: | Re: 1989 160 freedom |
Glad you figured it out. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|