| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Cutting speaker holes and using existing speaker holes https://www.smwebhead.com/phpBB3/viewtopic.php?f=19&t=3174 |
Page 1 of 1 |
| Author: | pet575 [ Mon Apr 06, 2009 3:34 pm ] |
| Post subject: | Cutting speaker holes and using existing speaker holes |
So, I've got a 10" sub to install soon. I've seen some people use the access hatch below the helm. Others have cut their own holes. Anyone have a strong opinion on one v. the other? Regardless, I suspect I'll have some degree of cutting to do (I don't think my access hatch will accommodate a 10" sub without cutting). So, what is the best method for cutting without damaging the gelcoat? Is it taping off the area around it and cutting with a jigsaw-then chamfering the edges? Or is it easy enough to cut with a Dremel? Also, I'm considering replacing the 6.5" stock Clarions in the cockpit. What is behind them? Are they just mounted into the plastic molding above the seat cushions, where the cupholders are? If so, what keeps that plastic molding from flexing, vibrating, buzzing, rattling, etc. when the new speakers are in there producing a lot more sound? Is this even a problem? Thanks. |
|
| Author: | BrentC5Z [ Mon Apr 06, 2009 3:51 pm ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
Jigsaw with a metal cutting blade has become my weapon of choice. |
|
| Author: | cougarcruiser [ Mon Apr 06, 2009 5:58 pm ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
If you have room to keep the access hatch, I would. It's nice to be able to poke around in there for maintenance or checking stuff out without having to pull the speaker. +1 on the metal blade jigsaw. Rotozip also works great! |
|
| Author: | Flying Sushi [ Mon Apr 06, 2009 8:12 pm ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
I am not a stereo guy but I have used Roto Zip tool for such an application. It is more maneuverable than jig saw especially for fiberglass. |
|
| Author: | 230 Mike [ Tue Apr 07, 2009 8:39 pm ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
When possible, I run blades/bits in reverse until they get through the gel coat, then switch to forward for the rest of the cut. Then chamfer the edges to help avoid cracks. |
|
| Author: | Jim_R [ Wed Apr 08, 2009 1:44 pm ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
When I added two 7" speakers in the rear cockpit (where there were'nt any before) I used a rotozip with circle cutter - worked great! |
|
| Author: | woggy718 [ Wed Apr 08, 2009 4:58 pm ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
When I added to additional speakers to the cockpit, I used a hole saw and drill. Get a perfect cut everytime. |
|
| Author: | blackmagicweekends [ Sat Apr 18, 2009 9:29 am ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
quit putting holes in your boat. Do you need the sound upgrade for playing "Phantom" sound track on the weekends??? Hole saw..................or roto zip with circle jig. |
|
| Author: | 230 Mike [ Sat Apr 18, 2009 3:00 pm ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
|
|
|
| Author: | pet575 [ Sun Apr 19, 2009 11:08 pm ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
There is nothing like the sound of the "Phantom of the Opera" soundtrack when out on the boat. Especially when I wear my cape to wakeboard. |
|
| Author: | jntwlsn [ Thu Apr 23, 2009 12:32 pm ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
pet575 wrote: There is nothing like the sound of the "Phantom of the Opera" soundtrack when out on the boat. Especially when I wear my cape to wakeboard. Have you installed your subwoofer yet? If not, I have some ideas that worked great for me. |
|
| Author: | jmikula [ Thu Apr 23, 2009 7:18 pm ] |
| Post subject: | Re: Cutting speaker holes and using existing speaker holes |
Flying Sushi wrote: I am not a stereo guy but I have used Roto Zip tool for such an application. It is more maneuverable than jig saw especially for fiberglass. +1 rotozip is the way to go |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|