www.iFourWinns.com

I decided to add two additional Polk speakers so the passengers in the back can actually hear the radio. To help power the two new speakers, I picked up a 600W Sony Amp. Overall, not too difficult of an install and it sounds pretty good.

_________________

http://youtu.be/-4ckF7u1iNk
2003 PowerQuest 260 Legend SX
2014 Lund WC 14

2007 H210 Volvo 5.7 Gi/SX (sold in 2012)
2007 H180 Volvo 3.0 (sold in 2009)

Very nice! Did you just use a jig saw to cut the hole? I have a stereo upgrade planned as well. I have 2 pairs of the DB 651 speakers sitting in the garage. I need to get one more pair, the remote, and a couple of amps, a box and a sub. Luvmysl242 was my inspiration

_________________
2011 SL242 5.7 VP GXi - 320 HP Dual Prop

Thanks. I used a Dremel tool with a fiberglass cutting bit. I drilled a small pilot hole backwards first and then used the Dremel to follow the circle I traced from the speaker's rubber gasket that I traced.

_________________

http://youtu.be/-4ckF7u1iNk
2003 PowerQuest 260 Legend SX
2014 Lund WC 14

2007 H210 Volvo 5.7 Gi/SX (sold in 2012)
2007 H180 Volvo 3.0 (sold in 2009)

Looks good!!