www.iFourWinns.com • View topic

View unanswered posts | View active topics

Board index » The Lobby » Boating Banter

All times are UTC - 6 hours [ DST ]

Lets pick it apart

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

christiantrevor

Post subject: Lets pick it apart

Posted: Mon Jul 28, 2008 2:52 pm

email admin your custom rank

Joined: Wed Apr 09, 2008 11:57 pm
Posts: 173
Location: So. California

http://cgi.ebay.com/Handcrafted-Four-Wi ... dZViewItem

Someone should inform him his rendition is not completely accurate.

I'll go first, those are not Faria gauges.

_________________

Jeff
2006 H240 6.2 MX 320HP B3
La Habra, California

Top

230 Mike

Post subject: Re: Lets pick it apart

Posted: Mon Jul 28, 2008 3:48 pm

230 Mike

Joined: Mon May 15, 2006 7:59 pm
Posts: 5141
Location: Kansas City, Table Rock Lake

The proportions are wrong in every dimension. Wrong width, wrong deadrise, too little space in the bow & too much in the cockpit...

A nice effort though.

_________________

Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic

Top

Txjole2

Post subject: Re: Lets pick it apart

Posted: Mon Jul 28, 2008 4:15 pm

email admin your custom rank

Joined: Thu Mar 20, 2008 12:02 pm
Posts: 652
Location: Dallas TEXAS

v-drive is the first thing I see.

_________________

Top

Paradise

Post subject: Re: Lets pick it apart

Posted: Mon Jul 28, 2008 4:15 pm

Just-N-Paradise

Joined: Tue Mar 27, 2007 1:15 pm
Posts: 222
Location: Trophy Club, TX

Inboard??

_________________
2007 Four Winns 220SS (Sold!!)
2006 Toyota Tacoma

Top

Paradise

Post subject: Re: Lets pick it apart

Posted: Mon Jul 28, 2008 4:16 pm

Just-N-Paradise

Joined: Tue Mar 27, 2007 1:15 pm
Posts: 222
Location: Trophy Club, TX

TX beat me to it

_________________
2007 Four Winns 220SS (Sold!!)
2006 Toyota Tacoma

Top

mikebaker1975

Post subject: Re: Lets pick it apart

Posted: Mon Jul 28, 2008 9:12 pm

email admin your custom rank

Joined: Sun Sep 30, 2007 9:58 pm
Posts: 236
Location: Urbandale, Ia

Almost looks like a center console fishing boat with FW graphics.

_________________
2005 Horizon 210, 5.7L Volvo

Top

230 Mike

Post subject: Re: Lets pick it apart

Posted: Mon Jul 28, 2008 9:44 pm

230 Mike

Joined: Mon May 15, 2006 7:59 pm
Posts: 5141
Location: Kansas City, Table Rock Lake

I wonder if it comes on the same crappy trailer?

_________________

Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic

Top

Graham R

Post subject: Re: Lets pick it apart

Posted: Tue Jul 29, 2008 6:37 am

email admin your custom rank

Joined: Thu May 18, 2006 12:31 pm
Posts: 2108
Location: Chester, UK

Would it look better painted flat black?

Graham

Top

robbo3

Post subject: Re: Lets pick it apart

Posted: Tue Jul 29, 2008 12:06 pm

email admin your custom rank

Joined: Thu Mar 01, 2007 9:41 pm
Posts: 773
Location: Waukesha, WI

Graham R wrote:

Would it look better painted flat black?

With the removable cuddy?

The bow area also looks too small. One more thing...It's WOOD!

I have to give him credit though, he did a pretty good job for handcrafting a model.

_________________
-Rob.

Current boat: 2011 Yamaha AR210
Previous boat: 1998 Horizon RX 4.3GL SX

Top

christiantrevor

Post subject: Re: Lets pick it apart

Posted: Tue Jul 29, 2008 4:03 pm

email admin your custom rank

Joined: Wed Apr 09, 2008 11:57 pm
Posts: 173
Location: So. California

I don't think you can get that wet bar/entertainment center unless thats a Horizon 310

_________________

Jeff
2006 H240 6.2 MX 320HP B3
La Habra, California

Top

Wet Doggg

Post subject: Re: Lets pick it apart

Posted: Tue Jul 29, 2008 4:15 pm

email admin your custom rank

Joined: Fri May 19, 2006 11:15 am
Posts: 682

robbo3 wrote:

Graham R wrote:

Would it look better painted flat black?

With the removable cuddy?

The bow area also looks too small. One more thing...It's WOOD!

I have to give him credit though, he did a pretty good job for handcrafting a model.

I am not sure I agree. If this person is that good he should make it look a lot more like an actual Four Winns. This almost looks like a ski boat hull he built in the past and just used it and slapped some Four Winn graphics and such on it.

Top

CNC Machining Guy

Post subject: Re: Lets pick it apart

Posted: Wed Jul 30, 2008 11:25 am

Goldfish

Joined: Tue Jul 22, 2008 9:49 pm
Posts: 31
Location: Merrimack, NH

Chrome steering wheel and throttle setup???? :roll:

_________________
- Denis

2007 Horizon 210 SS
320 HP 5.7 Liter / Volvo Penta

2004 Chevrolet 2500 HD Extended Cab / 6.0 liter
2005 Harley FLSTNI - Aped
2008 Harley FLTRI

Top

millhaven_nice_guy

Post subject: Re: Lets pick it apart

Posted: Wed Jul 30, 2008 11:47 am

email admin your custom rank

Joined: Wed Dec 12, 2007 3:56 pm
Posts: 1046
Location: Millhaven, ON

Give the guy a break! I have the utmost respect for any true craftsman. I like to build things too but the finishing department is not my specialty. Anything I build takes forever to get "perfect" and half the time ends up getting finished in a mad rush with less than desirable results (I have totally given up on drywall joints and have a taper on speed dial!!!)The guy has obviously taken another model and transformed it into this rendition and has done a tremendous job at the perception that it is a Four Winns.

I ask myself why he did this and i have to believe that he has a love for the brand/boat and wanted to commemorate it with this model. I applaud him for his attempt and if it was a match to my boat I might consider making him an offer so I could have it to gaze upon in the off season. It doesn't matter if it's not perfect. By the way, i believe he may have been trying to copy the H310 seating layout and I really don't like that wake board tower thingy he has above the windshield.

_________________
Marc, Kathlin & Nathalie

'89 Chaparral Laser 32

'93 Vista 245, 5.8L w/ King Cobra

Former Boats
'01 H260, 7.4 VP Duoprop
'98 H200, 5.0 GL w/VP SX drive

Top

Page 1 of 1

[ 13 posts ]

Board index » The Lobby » Boating Banter

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum