www.iFourWinns.com

I picked out what I think is the best location to mount my magma grill and I could use some feedback. The fiberglass isn't the thickest in that part (somewhere around 1/8th). Would it be better to use a piece of aluminum or wood as a backing plate? The plate can only fit in the size of the hole for the cup holder, so that's going to be it's size.

I got the mount:
http://www.magmaproducts.com/Products/M ... 0-126.html

Here's the spot I picked that works out the best. Easy to get at when on the boat, and easy to get at without getting on the boat when beached.

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold
Rick's Four Winns H180 Mods/Upgrade Thread

I would use a backer plate. As big as you can get

_________________
2001 Horizon 260 - 7.4 Volvo GSI DP

Here is where I mounted the same grill mount and it worked out well. No additional support is required here. Plus, it will double as a flag holder.

_________________
-Rob.


Current boat: 2011 Yamaha AR210
Previous boat: 1998 Horizon RX 4.3GL SX