ric wrote:
I really want to buy a GoPro Hero 3 White edition, but my car needs new rear tires BAD.
Today's project is to build a PVC guide pole for the jet ski trailer and replace the two side marker lights. I can't see the damn thing backing up when the ski is off. Pretty much like a 1-2in 4ft pole held on by two U bolts.
i have a set of the magnetic bright yellow fiberglass trailer guide poles that you can put not he ball and tung to align. i also use them for the ski trailers and the little utility trailers.. strong magnet. I like that i can transfer them easy to whatever i am towing and they were $15.....
You could do a short fiberglass pole (the bicycle poles or go cart poles) use 1/2" span U bolt it to the trailer frame. as you do not need hard guides just an indicator guide for trailer backing when empty. and the glass pole is flexible easy and will not harm the ski..
speaking of skis my buddy took the head of his Yam GP1200R to work today and shaved 35thou off of it boosting it to 160psi on the 800cc 2cyl jugs that make 60hp vs the stock 51hp 1200 jugs. the jugs will get a 90mm bore to make the motor 1390cc.. should be fun. other goodies include: ride plate, intake grate, jets, modified air box, upgraded jet pump. it will be ran with a stock impeller with this configuration and the new nozzle to see base numbers and determine which pitch impeller to add. hoping to see mid to upper 70s with these mods and the hull mods.. over the stock 63-64mph..
just a little toy that 2 friends have been playing with on the cheap..
_________________
Not Penny's Boat
1993 190 Horizon 5.0L EFI http://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=111361977 14' CMF Skiff SOLD
2015 Emotion Stealth Angler 11