| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Four Winns Factory Website https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=10336 |
Page 1 of 1 |
| Author: | DaleG [ Sat Sep 15, 2012 9:08 am ] |
| Post subject: | Four Winns Factory Website |
This is probably an old topic -- but what happened to the parts diagrams on the Four Winns Site. I used to use them to see what to order and what was available???? Maybe I am missing the place on the new site??? thx Dale |
|
| Author: | acguy [ Sat Sep 15, 2012 9:43 am ] |
| Post subject: | Re: Four Winns Factory Website |
Gone!!!! Post what you are looking for and i am sure someone on here has it saved and can send it to you |
|
| Author: | rpengr [ Sat Sep 15, 2012 10:49 am ] |
| Post subject: | Re: Four Winns Factory Website |
DaleG wrote: This is probably an old topic -- but what happened to the parts diagrams on the Four Winns Site. I used to use them to see what to order and what was available???? Maybe I am missing the place on the new site??? thx Dale Dale, We are neighbors here in West Palm Beach. Where do you keep your Horizon? I trailer from Lake Clarke Shores. A few years earlier than yours, but I had downloaded the 1999/2000 spec sheets and Complete Owners manual from the old web site. Here they are: 1999/2000 Horizon 240 spec sheets: http://www.rpengr.com/1999_240%20Horizon(p28-33).pdf 1999 Horizon/Sundowner Owners Manual Complete (5.3MB): http://www.rpengr.com/Four%20Winns%201999%20Manual%20(Complete)%20-%205.3MB.pdf |
|
| Author: | 298VISTA2000 [ Sat Sep 15, 2012 12:25 pm ] |
| Post subject: | Re: Four Winns Factory Website |
DaleG wrote: what happened to the parts diagrams on the Four Winns Site. I used to use them to see what to order and what was available???? Yep, gone. I used to pull up the website and then make my service dept guy on the other end do the same to make sure the right part was ordered. Now I get to take a picture of the part and then e-mail it to them. |
|
| Author: | ric [ Sat Sep 15, 2012 12:29 pm ] |
| Post subject: | Re: Four Winns Factory Website |
and That's why four winns didn't rank for customer service |
|
| Author: | sachem29 [ Sat Sep 15, 2012 1:06 pm ] |
| Post subject: | Re: Four Winns Factory Website |
Four winns if you pay attention at all to this forum please reinstate past product info and parts info. It was very helpful to me in determining what boat to buy in regards to draft, beam, length, weight.. Etc. I'm sure I'm not alone here.... |
|
| Author: | JohnnyMarlin [ Sat Sep 15, 2012 1:25 pm ] |
| Post subject: | Re: Four Winns Factory Website |
Hey Guys, Four Winns parts site is alive and well.......however, it is not currently being linked to in the new/current website..... http://www.fourwinns.net/partbook/index.php |
|
| Author: | 298VISTA2000 [ Sat Sep 15, 2012 3:20 pm ] |
| Post subject: | Re: Four Winns Factory Website |
JohnnyMarlin wrote: Hey Guys, Four Winns parts site is alive and well.......however, it is not currently being linked to in the new/current website..... http://www.fourwinns.net/partbook/index.php Thanks for the link JohnnyMarlin but they don't cater to the 298V even to the last production date of 2005. Can't really blame them though. You have to have a cut off date sooner or later. Best bet is to e-mail them a picture of the part in question if in doubt. |
|
| Author: | 298VISTA2000 [ Sat Sep 15, 2012 3:36 pm ] |
| Post subject: | Re: Four Winns Factory Website |
Deleted. Doesn't belong on this thread. |
|
| Author: | JohnnyMarlin [ Sat Sep 15, 2012 4:59 pm ] |
| Post subject: | Re: Four Winns Factory Website |
298VISTA2000 wrote: Thanks for the link JohnnyMarlin but they don't cater to the 298V even to the last production date of 2005. They have the 2005 298V...........right here...http://www.fourwinns.net/partbook/basemodel.php?model=298V-D05 and the 2000 298V...here........http://www.fourwinns.net/partbook/basemodel.php?model=298V-D00 It's all there! |
|
| Author: | DaleG [ Tue Sep 18, 2012 9:28 am ] |
| Post subject: | Re: Four Winns Factory Website |
Hey -- thanks for the link -- I would love to figure out how to get all the info copied somewhere that I need. There is no telling how long the link will really be active thx Dale |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|