www.iFourWinns.com

I'm looking for 5/8 piping for the water circulation system. Nobody gives any real specifics of what to use/buy. Help?

Maybe this?
http://www.jmsonline.net/shields-58-x-5 ... 50586b.htm

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold
Rick's Four Winns H180 Mods/Upgrade Thread

Rick

This is what I used when I did the install on my 248. Make sure it it reinforced tubing which it looks by the picture it is. I never had any issues and have used it at work on water cooled A/C units in the worst kind of atmosphers and places
Sorry used the Canadian website but you will figure it out!

http://www.homedepot.ca/product/sbvmk-10-tubing-7-8-inch-od-x-5-8-id/925301

_________________
2001 328 Vista "Nauta Dream 2"
AB Inflatable 10AL "Little Dreamer"
2000 248 Vista
1997 225 Sundowner


Mike

Cool we got that here...
http://www.homedepot.com/p/t/100135931? ... escription

but the "marine" stuff seems to be cheaper

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold
Rick's Four Winns H180 Mods/Upgrade Thread

This stuff is better. It will not colapse or kink if you need to bend in a tight spot!

_________________
2001 328 Vista "Nauta Dream 2"
AB Inflatable 10AL "Little Dreamer"
2000 248 Vista
1997 225 Sundowner


Mike

k well nevermind this thread. I ordered both items i needed on ebay (hose, triplex) from florida sellers.

That should put me everything needed except batteries and switch for install.

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold
Rick's Four Winns H180 Mods/Upgrade Thread