www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sat May 03, 2025 3:59 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Wed May 29, 2013 7:05 pm 
Offline
Starfish

Joined: Sun Oct 07, 2012 1:53 pm
Posts: 59
I was going to replace one of the sections of hose coming from the seacock for the AC on our 97 278 vista. when i took the hose with me to the boat store i was told that the white sanitation type hose that was on there was incorrect and that i need to have reinforced hose. Is this correct? both the seacock for the toilet and the seacock for the AC are using the same white hose.

What hose did Four Winns send out from the factory and what kind of ho=ose should be used?

_________________
1997 278 Vista twin 5.7's


Top
 Profile  
 
PostPosted: Wed May 29, 2013 7:25 pm 
Offline
email admin your custom rank

Joined: Wed Jun 01, 2011 10:21 am
Posts: 5667
Location: Austin, TX
I have A good 15+ft of 5/8 reinforced hose left after my ac install. How much u need? Its teleflex shields. The best you can buy for marine AC

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold

Rick's Four Winns H180 Mods/Upgrade Thread


Top
 Profile  
 
PostPosted: Wed May 29, 2013 7:57 pm 
Offline
Starfish

Joined: Sun Oct 07, 2012 1:53 pm
Posts: 59
ric wrote:
I have A good 15+ft of 5/8 reinforced hose left after my ac install. How much u need? Its teleflex shields. The best you can buy for marine AC


If this white hose that is on their now is not intended for this application then i will most likely replace all of it. Which i would think would be at least 15'. I would have to do both AC and toilet intake hose.

_________________
1997 278 Vista twin 5.7's


Top
 Profile  
 
PostPosted: Wed May 29, 2013 7:59 pm 
Offline
email admin your custom rank

Joined: Wed Jun 01, 2011 10:21 am
Posts: 5667
Location: Austin, TX
EBay it then. Nearly half the cost of west marine. I got a 50ft roll for $65 shipped. Double braided rated for 200 psi and use 2 hose clamps on everything

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold

Rick's Four Winns H180 Mods/Upgrade Thread


Top
 Profile  
 
PostPosted: Wed May 29, 2013 8:05 pm 
Offline
Starfish

Joined: Sun Oct 07, 2012 1:53 pm
Posts: 59
ric wrote:
EBay it then. Nearly half the cost of west marine. I got a 50ft roll for $65 shipped. Double braided rated for 200 psi and use 2 hose clamps on everything


Will do! the stuff they were trying to sell me at the boat store was $6 per foot!!!!!!

_________________
1997 278 Vista twin 5.7's


Top
 Profile  
 
PostPosted: Wed May 29, 2013 8:13 pm 
Offline
email admin your custom rank

Joined: Wed Jun 01, 2011 10:21 am
Posts: 5667
Location: Austin, TX
saltlife wrote:
ric wrote:
EBay it then. Nearly half the cost of west marine. I got a 50ft roll for $65 shipped. Double braided rated for 200 psi and use 2 hose clamps on everything


Will do! the stuff they were trying to sell me at the boat store was $6 per foot!!!!!!


Yup. West marine wants $3.15 a foot for shields 135. I got it for $1 a foot.

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold

Rick's Four Winns H180 Mods/Upgrade Thread


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group