| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Replacing seats i https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=13665 |
Page 1 of 1 |
| Author: | Steve@4winns [ Mon Dec 15, 2014 3:38 pm ] |
| Post subject: | Replacing seats i |
I need to replace my seats in my 1988 205 Sundowner. Does any one know if the box in which the seats sit are 10 inch or 12 inch? |
|
| Author: | NiagaraChillin [ Tue Dec 16, 2014 1:01 am ] |
| Post subject: | Re: Replacing seats i |
10 or 12 inch wide, long, tall? I don't have the "headknocker" back to back, fold out seats. Have you considered switching out for pedestal seats? They open up a lot of room in the cockpit. |
|
| Author: | Steve@4winns [ Tue Dec 16, 2014 8:46 am ] |
| Post subject: | Re: Replacing seats i |
NiagaraChillin wrote: 10 or 12 inch wide, long, tall? I don't have the "headknocker" back to back, fold out seats. Have you considered switching out for pedestal seats? They open up a lot of room in the cockpit. I have back to back fold out seats. The boat is stored away in the boat yard so I can not measure them. I need to replace them but I do nmot know if they are 10 or 12 inch or does it really matter. |
|
| Author: | LouC [ Tue Dec 16, 2014 9:55 pm ] |
| Post subject: | Re: Replacing seats i |
I agree with switching to the pedestal seats, they will give a lot more room in the cockpit. You will have to remove the seat boxes though and have to either re-do the carpeting or (preferably) get rid of it all together and gelcoat or coat the deck with a marine deck liner. I have the pedestals in my '88 Horizon (same hull different cap design) and there is a lot of room between them and the rear bench seat. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|