| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 1991 Cuddy Parts Help https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=137 |
Page 1 of 1 |
| Author: | azboater [ Mon Jun 19, 2006 3:27 pm ] |
| Post subject: | 1991 Cuddy Parts Help |
This is my first Four Winns, its a 1991 22ft Cuddy. I'm in need of replacing the plexiglass door/hatch cover entrance to the cuddy. The factory no longer lists it as available. Anyone have any ideas or help? And is this going to be a common thing for parts on a boat this age? Thanks Travis |
|
| Author: | Sprint8 [ Mon Jun 19, 2006 10:38 pm ] |
| Post subject: | |
If there is just a simple curve in the plexiglass it can be fabricated by any good shop specializing in bending plexiglass. Mine is a 1988 so the door is different. |
|
| Author: | BerndM [ Tue Jul 04, 2006 8:11 pm ] |
| Post subject: | |
I have a 1992 Sundowner 205 Cuddy and my smoke colored plexiglass doors are absolutely flat. I suspect your's are similars to mine. If you have all the old hardware and hinges, just find a plastics vendor near you and have them cut you a pair. The only tricky part would be the overlapping area on the free edges of the doors which are milled down to half thickness so that the latch can lock the 2 doors together. Good luck Bernd |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|