Mine's out in the shed, found this picture with a quick search. Take a 2'x8'x8 and cut it into 2' sections. Leave a 3/4" gap in between two of them, and make an H shape.
Put it on casters and there you go. Cheap but works great.
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Lower unit stands https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=15889 |
Page 1 of 1 |
| Author: | kmack [ Wed Apr 18, 2018 8:49 am ] |
| Post subject: | Lower unit stands |
I love projects! I'm looking at building a stand to support the lower unit when I'm doing maintenance items. Looking for ideas... I have an outboard in my case, but the stand should be similar for the lower unit. What do you have or what have you built? Let's share! |
|
| Author: | EvilZ [ Wed Apr 18, 2018 9:21 am ] |
| Post subject: | Re: Lower unit stands |
If you do a search for previous posts you might come across some info. One of the stands that others have used/suggested is fro Stumpy's: https://www.stumpysfabworks.com/boat-outdrive-jack.html Looks like a pretty reasonably priced stand. IIRC, others have used a stand from Harbor Freight as a starting point. Others will likely chime in with ideas, Good luck!! Erik |
|
| Author: | firecadet613 [ Thu Apr 19, 2018 10:41 pm ] |
| Post subject: | Re: Lower unit stands |
Mine's out in the shed, found this picture with a quick search. Take a 2'x8'x8 and cut it into 2' sections. Leave a 3/4" gap in between two of them, and make an H shape. Put it on casters and there you go. Cheap but works great.
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|