www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Check those screws
https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=1676
Page 1 of 1

Author:  wkearney99 [ Sat Mar 29, 2008 7:35 am ]
Post subject:  Check those screws

When doing your spring commissioning be SURE to go around the boat and check that all the screws are tight. Likewise use a hex driver and check all your hose clamps. When I went around the cockpit in our 348 I noticed more than a couple of screws that were a bit loose.

All the wave action is sure to loosen things a bit, so make it a point to check them.

Author:  230 Mike [ Sat Mar 29, 2008 2:15 pm ]
Post subject:  Re: Check those screws

I agree, after discovering last year that nearly every screw and clamp on the boat was loose to some degree - some to a large degree. Don't forget windshield mounting screws. On them I took each one out and put a dab of silicone on the threads to keep them from backing out so easily.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/