www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
238/248 Engine compartment capacity https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=2182 |
Page 1 of 1 |
Author: | beyond the blue [ Sun Jul 13, 2008 9:32 am ] |
Post subject: | 238/248 Engine compartment capacity |
Does anyone know of the top of their heads, the cubic capacity of the 238/248 Vista engine compartment, I need it to order the correct size of Auto Fire Extinguisher. I could ask Four Winns, but you guys are usually quicker. |
Author: | Brett248Vista [ Sun Jul 13, 2008 7:13 pm ] |
Post subject: | Re: 238/248 Engine compartment capacity |
Hold on for a few minutes, I am getting out my boat bag and will give you the Fireboy part number for the OEM in my 248 |
Author: | Brett248Vista [ Sun Jul 13, 2008 7:23 pm ] |
Post subject: | Re: 238/248 Engine compartment capacity |
Crap! My documentation covers numerous sizes and doesn't have the part number! |
Author: | AlexJ [ Mon Jul 14, 2008 10:07 am ] |
Post subject: | Re: 238/248 Engine compartment capacity |
I'm not sure of the capacity but I have a Fireboy - Xintex , part number CG2-125-FE241( Fireboy FE241 System ). It cost me $165 in 06 direct from Fireboy. It was a replacement for one that I had and could not refill. This one can be refilled. I have a 238. |
Author: | Brett248Vista [ Mon Jul 14, 2008 10:30 am ] |
Post subject: | Re: 238/248 Engine compartment capacity |
I think the 25 in the 125 might stand for the size (25 cubic feet) which I believe is the size they start at. Of course that's me making a lot of assumptions and you know how that goes! If you need to me to check mine I can, it's just a PITA ![]() |
Author: | beyond the blue [ Mon Jul 14, 2008 12:25 pm ] |
Post subject: | Re: 238/248 Engine compartment capacity |
According to Fireboy-Xintex site the one Alexj is using (CG2-125-FE241) protects 125 Cubic Feet, which seems a bit overkill to me, but, far better to overkill than to "nearly" put the fire out. That model retails over here in the UK at over $700 ![]() Think I'll try an alternative make. Thanks all. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |