www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Lets pick it apart https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=2257 |
Page 1 of 1 |
Author: | christiantrevor [ Mon Jul 28, 2008 2:52 pm ] |
Post subject: | Lets pick it apart |
http://cgi.ebay.com/Handcrafted-Four-Wi ... dZViewItem Someone should inform him his rendition is not completely accurate. I'll go first, those are not Faria gauges. |
Author: | 230 Mike [ Mon Jul 28, 2008 3:48 pm ] |
Post subject: | Re: Lets pick it apart |
The proportions are wrong in every dimension. Wrong width, wrong deadrise, too little space in the bow & too much in the cockpit... A nice effort though. |
Author: | Txjole2 [ Mon Jul 28, 2008 4:15 pm ] |
Post subject: | Re: Lets pick it apart |
v-drive is the first thing I see. |
Author: | Paradise [ Mon Jul 28, 2008 4:15 pm ] |
Post subject: | Re: Lets pick it apart |
Inboard?? |
Author: | Paradise [ Mon Jul 28, 2008 4:16 pm ] |
Post subject: | Re: Lets pick it apart |
TX beat me to it |
Author: | mikebaker1975 [ Mon Jul 28, 2008 9:12 pm ] |
Post subject: | Re: Lets pick it apart |
Almost looks like a center console fishing boat with FW graphics. |
Author: | 230 Mike [ Mon Jul 28, 2008 9:44 pm ] |
Post subject: | Re: Lets pick it apart |
I wonder if it comes on the same crappy trailer? |
Author: | Graham R [ Tue Jul 29, 2008 6:37 am ] |
Post subject: | Re: Lets pick it apart |
Would it look better painted flat black? Graham |
Author: | robbo3 [ Tue Jul 29, 2008 12:06 pm ] |
Post subject: | Re: Lets pick it apart |
Graham R wrote: Would it look better painted flat black? With the removable cuddy? The bow area also looks too small. One more thing...It's WOOD! I have to give him credit though, he did a pretty good job for handcrafting a model. |
Author: | christiantrevor [ Tue Jul 29, 2008 4:03 pm ] |
Post subject: | Re: Lets pick it apart |
I don't think you can get that wet bar/entertainment center unless thats a Horizon 310 |
Author: | Wet Doggg [ Tue Jul 29, 2008 4:15 pm ] |
Post subject: | Re: Lets pick it apart |
robbo3 wrote: Graham R wrote: Would it look better painted flat black? With the removable cuddy? The bow area also looks too small. One more thing...It's WOOD! I have to give him credit though, he did a pretty good job for handcrafting a model. I am not sure I agree. If this person is that good he should make it look a lot more like an actual Four Winns. This almost looks like a ski boat hull he built in the past and just used it and slapped some Four Winn graphics and such on it. |
Author: | CNC Machining Guy [ Wed Jul 30, 2008 11:25 am ] |
Post subject: | Re: Lets pick it apart |
Chrome steering wheel and throttle setup???? ![]() |
Author: | millhaven_nice_guy [ Wed Jul 30, 2008 11:47 am ] |
Post subject: | Re: Lets pick it apart |
Give the guy a break! I have the utmost respect for any true craftsman. I like to build things too but the finishing department is not my specialty. Anything I build takes forever to get "perfect" and half the time ends up getting finished in a mad rush with less than desirable results (I have totally given up on drywall joints and have a taper on speed dial!!!)The guy has obviously taken another model and transformed it into this rendition and has done a tremendous job at the perception that it is a Four Winns. I ask myself why he did this and i have to believe that he has a love for the brand/boat and wanted to commemorate it with this model. I applaud him for his attempt and if it was a match to my boat I might consider making him an offer so I could have it to gaze upon in the off season. It doesn't matter if it's not perfect. By the way, i believe he may have been trying to copy the H310 seating layout and I really don't like that wake board tower thingy he has above the windshield. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |