| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| H200 wake tower issues https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=7186 |
Page 1 of 1 |
| Author: | Jerry S [ Sat Mar 19, 2011 7:51 pm ] |
| Post subject: | H200 wake tower issues |
Is there any way to better fasten the tower on my 2009 Four Winns than the factory has done ? My gaskets need very frequent adjustments and a retightening of the single bolt. It is always working loose and gasket turning out of position. |
|
| Author: | JDW250 [ Sun Mar 20, 2011 7:18 am ] |
| Post subject: | Re: H200 wake tower issues |
I've only had my FW with the factory wake tower for one season, but none of those bolts have worked loose on mine. Is it one bolt giving you troubles, or are they all having this issue? Have you tried some thread lock to keep the bolts from working loose? Sorry I can't be of more help, but I'm going to keep a closer eye on my wake tower fasteners from now on. |
|
| Author: | Walt [ Sun Mar 20, 2011 8:12 am ] |
| Post subject: | Re: H200 wake tower issues |
I had the same issue on the front pads of mine first season. I had it in for some glass work on the rear mounts, and the place put in either nyloc nuts, or just lock washers (not sure) to alleviate the problem. Hasn't occured in the two seasons since. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|