www.iFourWinns.com

This is my second season with my '96 Horizon so I thought it would be a good idea to check the hoses and connections on the tank. After lifting up tthe floor panels I was surprised to find that the tank was lose and could easily be shifted with a nudge. The aluminum clips were not touching the tank at all. I used wooden shims under the clips to secure it. Also found some clown at the factory installed one hose clamp was facing down against the tank! No way to check it for tighness without breaking the clamp or losening the fitting. I'll let sleeping dogs lie on that one till I replace all the hoses in the future. There are hose-like pads under the tank that have shifted and partially block the bilge drainage so they'll need to be moved too.

_________________
'96 Horizon 200
"Have fenders...will raft"