| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Propeller Nuts https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=8153 |
Page 1 of 1 |
| Author: | Vista378 [ Thu Aug 04, 2011 9:33 am ] |
| Post subject: | Propeller Nuts |
Hi All, I am looking to source propeller nuts for a FW Vista 378. I am running on two Volvo Penta TAMD63 PA Engines 37O hp. I have tried all over to get part numbers for these but no joy. To get them manufactured is ridiculously expensive. Any suggestions on the best way to source these? Would they be a Volvo part or a spurious part? Thanks, Pete |
|
| Author: | Paul I. [ Thu Aug 04, 2011 11:26 am ] |
| Post subject: | Re: Propeller Nuts |
Try this place, they have been good to me!! http://www.marinepartsplus.com/catalog/ ... e%20Parts/ |
|
| Author: | JordanFTW [ Thu Aug 04, 2011 3:06 pm ] |
| Post subject: | Re: Propeller Nuts |
Find your drive here: http://www.marinepartseurope.com/en/vol ... sions.aspx and then look up the part number for your prop nut. Google search that part number to find your replacement. I would help, but you have not told us what drives you have. |
|
| Author: | M3eater [ Thu Aug 04, 2011 3:22 pm ] |
| Post subject: | Re: Propeller Nuts |
With those engines (diesel), he is going to be inboard drive. fourwinns.net does not show the props or the nuts .... just the shafts. |
|
| Author: | wkearney99 [ Fri Aug 05, 2011 10:02 am ] |
| Post subject: | Re: Propeller Nuts |
Vista378 wrote: Any suggestions on the best way to source these? Ask the factory. boating@fourwinns.com Be sure to include you Hull number when asking questions. This way they can look up what the factory knew about it when it was built. Things may have changed in the meanwhile, but that'll at least give them a starting point. That or find a local propeller shop and ask them for help. I'd imagine local marine yard shops would have spare prop nuts around too. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|