| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Help!!!! Need the bow and cockpit cover supports 2008 H220SS https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=8311 |
Page 1 of 1 |
| Author: | Jafo4U [ Mon Aug 29, 2011 11:50 pm ] |
| Post subject: | Help!!!! Need the bow and cockpit cover supports 2008 H220SS |
Anyone with tips or if you have a pair you don't use drop me a line. I am sick of the swimming pool that I run into when my rigged supports give out. Also, need a new horn the one that is on it now is definitely done! Thanks for your help guys.  Joe in Miami
|
|
| Author: | askieffer [ Tue Aug 30, 2011 5:26 pm ] |
| Post subject: | Re: Help!!!! Need the bow and cockpit cover supports 2008 H220SS |
The support poles on our SL242 would not hold any weight due to the thumb screw. I put the covers on with the poles and measured from the support arm to the floor and cut a 2" piece of PVC that I slip over the poles. The only issue now is they slip sometimes but that's an easy fix. |
|
| Author: | Jafo4U [ Tue Aug 30, 2011 7:30 pm ] |
| Post subject: | Re: Help!!!! Need the bow and cockpit cover supports 2008 H220SS |
That is absolutely the greatest and simplest idea yet Home Depot here I come. Thanks for turning on the lightbulb up there it was getting clouded with all this marine certified talk. |
|
| Author: | askieffer [ Tue Aug 30, 2011 7:37 pm ] |
| Post subject: | Re: Help!!!! Need the bow and cockpit cover supports 2008 H220SS |
I have a cap on the bottom and I think that's why it slips but I was worried of the PVC "raw" edge marking the carpet. A "T" with a couple short pieces might help. |
|
| Author: | ric [ Tue Aug 30, 2011 7:39 pm ] |
| Post subject: | Re: Help!!!! Need the bow and cockpit cover supports 2008 H220SS |
Jafo4U wrote: That is absolutely the greatest and simplest idea yet Home Depot here I come. Thanks for turning on the lightbulb up there it was getting clouded with all this marine certified talk. Make sure that's ignition proof PVC |
|
| Author: | Jafo4U [ Tue Aug 30, 2011 7:42 pm ] |
| Post subject: | Re: Help!!!! Need the bow and cockpit cover supports 2008 H220SS |
Lmao!!! Your too funny! Fire retardant also! |
|
| Author: | Jafo4U [ Tue Aug 30, 2011 7:44 pm ] |
| Post subject: | Re: Help!!!! Need the bow and cockpit cover supports 2008 H220SS |
askieffer wrote: I have a cap on the bottom and I think that's why it slips but I was worried of the PVC "raw" edge marking the carpet. A "T" with a couple short pieces might help. That's exactly what I was thinking maybe with some Velcro on the pvc edge and the inside of the bow cover. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|