www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Backing plate for flush grill mount?
https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=8619		 Page 1 of 1
Author:  ric [ Thu Nov 17, 2011 10:11 am ]
Post subject:  Backing plate for flush grill mount?
I picked out what I think is the best location to mount my magma grill and I could use some feedback. The fiberglass isn't the thickest in that part (somewhere around 1/8th). Would it be better to use a piece of aluminum or wood as a backing plate? The plate can only fit in the size of the hole for the cup holder, so that's going to be it's size.

I got the mount:
http://www.magmaproducts.com/Products/M ... 0-126.html

Here's the spot I picked that works out the best. Easy to get at when on the boat, and easy to get at without getting on the boat when beached.
Image
Author:  St. Louis Dave [ Thu Nov 17, 2011 7:36 pm ]
Post subject:  Re: Backing plate for flush grill mount?
I would use a backer plate. As big as you can get
Author:  robbo3 [ Tue Jan 17, 2012 8:57 pm ]
Post subject:  Re: Backing plate for flush grill mount?
Here is where I mounted the same grill mount and it worked out well. No additional support is required here. Plus, it will double as a flag holder.

Image
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/