| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Prop Nuts Torque https://www.smwebhead.com/phpBB3/viewtopic.php?f=2&t=9962 |
Page 1 of 1 |
| Author: | Vista378 [ Tue Jul 31, 2012 5:00 am ] |
| Post subject: | Prop Nuts Torque |
I have been looking to get the exact figure for the torque required for the prop nuts (ft.lbs) for an inboard. A number of forums say that its just a good tight squeeze that is required. Does anyone here have any other opinions? |
|
| Author: | ric [ Tue Jul 31, 2012 7:18 am ] |
| Post subject: | Re: Prop Nuts Torque |
Vista378 wrote: I have been looking to get the exact figure for the torque required for the prop nuts (ft.lbs) for an inboard. A number of forums say that its just a good tight squeeze that is required. Does anyone here have any other opinions? Hold the prop with your hand and tighten the nut. If your hand holding the prop starts to hurt then it's tight. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|