| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Ray marine C80 not registering MPH https://www.smwebhead.com/phpBB3/viewtopic.php?f=20&t=6355 |
Page 1 of 1 |
| Author: | jsimon [ Tue Aug 10, 2010 11:47 am ] |
| Post subject: | Ray marine C80 not registering MPH |
Anyone have any thoughts on this. The GPS plots me on the chart plotter and gives the coordinates, but no mph, went thru all the menus and nothing is jumping out at me. |
|
| Author: | cougarcruiser [ Tue Aug 10, 2010 12:20 pm ] |
| Post subject: | Re: Ray marine C80 not registering MPH |
You have to add the command bar widget for COG/SOG your mph will be 'SOG' = Speed on Ground |
|
| Author: | jsimon [ Tue Aug 10, 2010 1:31 pm ] |
| Post subject: | Re: Ray marine C80 not registering MPH |
cougarcruiser wrote: You have to add the command bar widget for COG/SOG your mph will be 'SOG' = Speed on Ground What is command bar widget? and how do you add it? |
|
| Author: | Cap'n Morgan [ Tue Aug 10, 2010 1:51 pm ] |
| Post subject: | Re: Ray marine C80 not registering MPH |
The display will show up on the Data Bar. You can fit up to six items in the Data Bar. There should also be a "GPS Data" pageset that you can display by hitting the "page" key in the upper right, and using the softkeys at the bottom to select the page. If you don't have it, download the Raymarine "Quick Reference" from Raymarine site. |
|
| Author: | jsimon [ Tue Aug 10, 2010 2:22 pm ] |
| Post subject: | Re: Ray marine C80 not registering MPH |
I currently have the, GPS, sonar, auto pilot that is xed out, radar, and something like NIOS that is xed out. So if i am understanding, there is a way for me to put the SOG icon then it would work. |
|
| Author: | Frank_L [ Sun Aug 22, 2010 5:59 am ] |
| Post subject: | Re: Ray marine C80 not registering MPH |
You may have the unit set to display 'water speed' from a paddle wheel transducer. If there isn't one, then there will be no reading. Set to SOG from GPS satellites as others have indicated. regards Frank L |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|