www.iFourWinns.com

Anyone have any thoughts on this. The GPS plots me on the chart plotter and gives the coordinates, but no mph, went thru all the menus and nothing is jumping out at me.

_________________
Jeff

'14 Cruisers 380 Express "Simon Sez"
Merc 8.2 Mag MPI 380
DTS B3X, (x2) Axius Premier


(SOLD)
'08 V318
Merc 350 Mag MPI 300
DTS Seacore, B3 (x2)

You have to add the command bar widget for COG/SOG

your mph will be 'SOG' = Speed on Ground

_________________

2008 318 Vista -SOLD, but I am still around!
All Night Long, Seattle WA

What is command bar widget? and how do you add it?

_________________
Jeff

'14 Cruisers 380 Express "Simon Sez"
Merc 8.2 Mag MPI 380
DTS B3X, (x2) Axius Premier


(SOLD)
'08 V318
Merc 350 Mag MPI 300
DTS Seacore, B3 (x2)

The display will show up on the Data Bar. You can fit up to six items in the Data Bar.
There should also be a "GPS Data" pageset that you can display by hitting the "page" key in the upper right, and using the softkeys at the bottom to select the page.

If you don't have it, download the Raymarine "Quick Reference" from Raymarine site.

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista

Current Boat: 2004 Chaparral 235 ssi cuddy

I currently have the, GPS, sonar, auto pilot that is xed out, radar, and something like NIOS that is xed out.

So if i am understanding, there is a way for me to put the SOG icon then it would work.

_________________
Jeff

'14 Cruisers 380 Express "Simon Sez"
Merc 8.2 Mag MPI 380
DTS B3X, (x2) Axius Premier


(SOLD)
'08 V318
Merc 350 Mag MPI 300
DTS Seacore, B3 (x2)

You may have the unit set to display 'water speed' from a paddle wheel transducer.
If there isn't one, then there will be no reading.
Set to SOG from GPS satellites as others have indicated.

regards

Frank L