www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Volvo Neutra-Salt Installation instructions needed.
https://www.smwebhead.com/phpBB3/viewtopic.php?f=21&t=10838		 Page 1 of 1
Author:  boater50 [ Tue Jan 01, 2013 9:16 am ]
Post subject:  Volvo Neutra-Salt Installation instructions needed.
Does anyone have installation instructions for the Neutra Salt system? I bought a system off Ebay but it did not come with instructions....seems like a simple install, plus I am very handy, but just want to make sure I do it right.....Name a price....I'll even take a scanned & emailed version! Thanks..
Steve
Author:  boater50 [ Mon Feb 18, 2013 10:37 am ]
Post subject:  Re: Volvo Neutra-Salt Installation instructions needed.
Found them! Someone on another forum send me a pdf......Now, in the instructions it says to find a source of 12v power near the helm.....simple enough. The + wire has a ring tip on it, so that tells me to attach to the "ACC" terminal of the ignition switch? It has an inline fuse already, my fuse block seems full, and all connections are spade terminals, so I'm just wondering where to attach the wore? Obviously I only want power to the switch when the engine is running......any ideas, anyone? Thanks!!

Steve
Author:  Graham R [ Mon Feb 18, 2013 5:53 pm ]
Post subject:  Re: Volvo Neutra-Salt Installation instructions needed.
It only takes a very small current; if there's no free terminal on the fusebox, then chop off the ring terminal on the +12V cable to the fuse and fit a "piggyback" spade terminal, connect that to any switch that has a 12V supply; it doesn't have to be a terminal made live by the ignition being switched on.
Author:  boater50 [ Mon Feb 18, 2013 6:04 pm ]
Post subject:  Re: Volvo Neutra-Salt Installation instructions needed.
ah, good idea!....now if only the snow would melt.....!!!! :roll: :roll:
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/