www.iFourWinns.com

Does anyone have installation instructions for the Neutra Salt system? I bought a system off Ebay but it did not come with instructions....seems like a simple install, plus I am very handy, but just want to make sure I do it right.....Name a price....I'll even take a scanned & emailed version! Thanks..
Steve

_________________
"For My 50th"
1996 238 Vista
5.7VolvoGL DP
Previous boats; 91 Cobia 19' Cuddy, 87 Starcraft 16' BR,
67 Winner BR, 65 Arrow 14'

Found them! Someone on another forum send me a pdf......Now, in the instructions it says to find a source of 12v power near the helm.....simple enough. The + wire has a ring tip on it, so that tells me to attach to the "ACC" terminal of the ignition switch? It has an inline fuse already, my fuse block seems full, and all connections are spade terminals, so I'm just wondering where to attach the wore? Obviously I only want power to the switch when the engine is running......any ideas, anyone? Thanks!!

Steve

_________________
"For My 50th"
1996 238 Vista
5.7VolvoGL DP
Previous boats; 91 Cobia 19' Cuddy, 87 Starcraft 16' BR,
67 Winner BR, 65 Arrow 14'

It only takes a very small current; if there's no free terminal on the fusebox, then chop off the ring terminal on the +12V cable to the fuse and fit a "piggyback" spade terminal, connect that to any switch that has a 12V supply; it doesn't have to be a terminal made live by the ignition being switched on.

ah, good idea!....now if only the snow would melt.....!!!!

_________________
"For My 50th"
1996 238 Vista
5.7VolvoGL DP
Previous boats; 91 Cobia 19' Cuddy, 87 Starcraft 16' BR,
67 Winner BR, 65 Arrow 14'