| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Temp GaugeWiring? https://www.smwebhead.com/phpBB3/viewtopic.php?f=21&t=10861 |
Page 1 of 1 |
| Author: | Olivergm [ Mon Jan 14, 2013 9:43 am ] |
| Post subject: | Temp GaugeWiring? |
Hi, When I turn on the ignition the temp gauge jumps to its max. Any idea if this is a sensor issue or a lose wire behind the dial? When I turn it off the dial seems to stop momentarily at the correct temp before dropping to zero. Also it seemed to start working for a short while after a swift knock. Help please, useless sparky here... Cheers Oliver |
|
| Author: | Paul I. [ Mon Jan 14, 2013 10:13 pm ] |
| Post subject: | Re: Temp GaugeWiring? |
I would check the wiring. The temp sensor should be mounted on the stat housing. I would but a Seloc manual (I say this to everyone) its great info on everthing on engine & drive. It will even have the temp wire color code! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|