| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 4-IN-1 Faria gauge not working https://www.smwebhead.com/phpBB3/viewtopic.php?f=21&t=12178 |
Page 1 of 1 |
| Author: | nhlakes [ Sun Aug 18, 2013 3:44 pm ] |
| Post subject: | 4-IN-1 Faria gauge not working |
4-in-1 gauge on my 2004 Horizon 230 stopped working today. Can't see any loose connections. Any ideas on what to look at? The having no gas gauge is a pain. |
|
| Author: | Paul358V [ Sun Aug 18, 2013 6:39 pm ] |
| Post subject: | Re: 4-IN-1 Faria gauge not working |
In my case, both of my 4-in-1 gauges had defective armatures (coils). I removed them and shipped to Faria after calling for a return authorization repair tracking number. They came back within 2 weeks fully functional with original face plates, but ALL new gauges (all 4). Cost was $52 per gauge. Faria: 1-800-473-2742. Obviously, ensure it is a gauge problem, verses a wiring or sensor unit before removing the gauge. I swapped my port / starboard wires to ensure the gauge was the issue. One had a VDC gauge down scale and the other had a failed high temperature gauge. They both failed the 6th year of service (2007 boat, 2012 failures about 2 months apart). I made it a winter project before the 2013 season. |
|
| Author: | nhlakes [ Mon Aug 19, 2013 7:41 am ] |
| Post subject: | Re: 4-IN-1 Faria gauge not working |
thanks |
|
| Author: | firecadet613 [ Mon Aug 19, 2013 1:09 pm ] |
| Post subject: | Re: 4-IN-1 Faria gauge not working |
What a timely post. I'm trouble shooting my starboard fuel gauge. It'll act fine one minute and show empty the next. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|