I finally figured out how to post pics. So here is one of my LED setup. It has a key fob remote and 18 settings from solid colors to multi color and flashing modes.
Ross
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| LED lighting project.......need your help please! w/pic's https://www.smwebhead.com/phpBB3/viewtopic.php?f=21&t=2643 |
Page 1 of 8 |
| Author: | impulse [ Tue Dec 02, 2008 2:58 pm ] |
| Post subject: | LED lighting project.......need your help please! w/pic's |
One of my off season boat projects this winter is to add some LED accent lighting. I plan to add some LED rope light along the base of the rear bench seat as well as some accent lighting underneath the helm and passenger compartments and on the top side of the storage pockets on the sides of the boat. I can't seem to find a good source for purchasing what I want. Some of the questions I have so far are: 1. Would making all of this lighting feature dimmable be worthwhile? 2. Would running a rope light along the base of the bench seat and floor look cheesy or good? 3. Should I use small fixtures for the hidden accent lighting or would a short piece of rope light work? Other things to keep in mind. I do have a spare hot switch on the dash I could use for turn on, turn off of this aux lighting. I've never done a project like this before. I am mechanically and electrically inclined. I've wired up outlets, switches, celing fans, etc in the house and it hasn't burned down yet. Please feel free to comment on any or all parts of this. Thank you, David |
|
| Author: | Walt [ Tue Dec 02, 2008 4:35 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
Hey Impulse, Have you looked at my pics? If not, click on my link to see them. Sounds like you're headed down the same road I was about a year ago. I used rope lights (non-led) along the base so I could put on a dimmer if they seemed too intense. However, this was not neccesary. I thought about accent lighting, but decided the cupholders were more than sufficient. I am toying with rings for my speakers though. I would say LED accent lighting (6 LEDs should be sufficient), and the rope light as I did along the carpet edge would look very good! Good luck! |
|
| Author: | impulse [ Tue Dec 02, 2008 6:29 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
Walt - I did go back and look at some of your pic's actually. Very similar set up to what I'm going for. I do want to be able to switch this setup on and off independently of anything else, which is why I had the dealer add another switch for me incase. I've seen some remote controlable stuff where I would just wire directly to the batt or batt switch, but I really don't care about the remote control as much as the dimming. I just want to be able to tone down the intensity if necessary. (unless you guys that have these setups think the dimmer thing is not necessary) I also re-read Cincy's post on the LED install and there are two sources listed one by him: http://www.rockitlites.com and one by txjole: http://www.oznium.com/led-flex-strips. I'll probably price both of these guys out and see what they come up with. |
|
| Author: | Walt [ Tue Dec 02, 2008 7:00 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
Great! Sounds like you have a good plan. I spend a lot of time out on the water at night, and find the floor lighting isn't distracting, or too bright. Just a nice, soft glow. Mine is toggled with the courtesy lights. Remember, make sure none of your lighting cannot be confused for a nav light by other boaters! |
|
| Author: | Barefoot [ Tue Dec 02, 2008 9:08 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
I just installed a waterproof LED kit on my 1999 200 Horizon. I bought it on ebay from a guy named joe-florida. It is remote controlled and came with two 10' strands with six sets of nine lights and a 6' extention, controller and 2 remotes. It was enough to run along the sides but not under the dash on the driver side or the glove box area on the passenger side, so I called him and bought one more 10' strand and cut it in half and extended it under both driver and passenger side dash. It has 15 different settings from solid colors to flashing. The light bars have 3M molding tape and was very easy to install. Mine are under the gunnels and the extention was enough to make the jump across the engine compartment. I'm very happy with the results. The whole project with the extra strand was about $120.00 with shipping. Hope this helps, Ross Here is the ebay item #110303970380 |
|
| Author: | La Dolce Vita [ Wed Dec 03, 2008 5:00 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
How bout some pics? |
|
| Author: | impulse [ Thu Dec 04, 2008 1:30 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
Barefoot, please post some pic's if you have them, this sound very similar to what I am going for and that seems like a really good price for everything you got. |
|
| Author: | beyond the blue [ Thu Dec 04, 2008 7:09 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
I have been reading members posts over the last few months with regard to accent lighting... and no one seems to have mentioned using "Light Tape" http://www.lighttape.com not that I know anything about it, but it does look interesting stuff... anybody used it? |
|
| Author: | Barefoot [ Thu Dec 04, 2008 8:27 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
I will do my best to post some pic's. I'm still trying to figure out how to download them to a website and link them here. Ross |
|
| Author: | Txjole2 [ Fri Dec 05, 2008 2:02 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
I like mine hidden being that you only use them 10% of the time in the boat, I rather have them out of the way and not messed with. |
|
| Author: | Txjole2 [ Fri Dec 05, 2008 2:03 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
beyond the blue wrote: I have been reading members posts over the last few months with regard to accent lighting... and no one seems to have mentioned using "Light Tape" http://www.lighttape.com not that I know anything about it, but it does look interesting stuff... anybody used it? Light tape was not bright enough for me. I tried it. |
|
| Author: | Lakebum [ Sat Dec 06, 2008 1:22 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
Txjole2- That looks sweet. I'm looking at the oznium spot or floods to put under my swim platform in the spring. I'm not sure how bright they will be, but plan on starting with 4 total - maybe 2 on each side. |
|
| Author: | su2skelsey [ Mon Dec 22, 2008 4:33 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
Lakbum -- These look pretty good... I am thinking the same thing... And they are waterproof. |
|
| Author: | Barefoot [ Fri Feb 13, 2009 4:04 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
I finally figured out how to post pics. So here is one of my LED setup. It has a key fob remote and 18 settings from solid colors to multi color and flashing modes. Ross
|
|
| Author: | cougarcruiser [ Fri Feb 13, 2009 4:33 pm ] |
| Post subject: | Re: LED lighting project..........need your help please! |
controlled remotely... 18 settings... multi colored... flashing effects... We have a winner. What/where/how did you do this? Details! |
|
| Page 1 of 8 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|