| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| what kind of toggle switch? https://www.smwebhead.com/phpBB3/viewtopic.php?f=21&t=3495 |
Page 1 of 1 |
| Author: | su2skelsey [ Wed May 13, 2009 7:44 pm ] |
| Post subject: | what kind of toggle switch? |
I need to get a toggle switch for my four winns 268 (2004). do you think this will do... http://www.go2marine.com/product.do?no=113221F Thanks in advance, Scott |
|
| Author: | captwalt [ Wed May 13, 2009 8:34 pm ] |
| Post subject: | Re: what kind of toggle switch? |
what are u gonna be attaching to it? |
|
| Author: | su2skelsey [ Wed May 13, 2009 8:45 pm ] |
| Post subject: | Re: what kind of toggle switch? |
Two LED lights... |
|
| Author: | captwalt [ Thu May 14, 2009 12:10 am ] |
| Post subject: | Re: what kind of toggle switch? |
looks right. check out this other thread going on with the same thing http://www.smwebhead.com/phpBB3/viewtopic.php?f=7&t=3403 |
|
| Author: | su2skelsey [ Fri May 15, 2009 3:08 pm ] |
| Post subject: | Re: what kind of toggle switch? |
So I have a toggle switch on it that has three prongs on it: Positive to Battery Ground and ACC I have two LED lights that I ran wire from the led lights back to the toggle switch. I actually got the LED lights red wires combine to a single red wire running up to the dash board. And two black wires combined to a single black wire running to the dash. Here is my question, I have a 2004 FW 268 Vista, where do i connect the red wire coming from the led lights... on the fuse box or the toggle switch? I guess i don't understand how the fuse box works. I thought there was power running from the ACC on the fuse box? I thought this would be an easy project... I have to underwater LED lights hooked up the the boat and with no power. Any help would be appreciated. Thanks, Scott |
|
| Author: | captwalt [ Fri May 15, 2009 5:42 pm ] |
| Post subject: | Re: what kind of toggle switch? |
Scott, I have not wired a 3 prong switch before. Mine just had to prongs on it and served as a break in a connection to the remote wire on my amp. Silly question but do you have a fuse in the panel for the accessory wire your connecting to? If u do do you have the 12V up at the wire? |
|
| Author: | su2skelsey [ Sun May 17, 2009 1:04 pm ] |
| Post subject: | Re: what kind of toggle switch? |
My problem was that I didn't have the toggle switch grounded properly... I ran a wire back to to ground on the fuse box and everything worked as it should. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|