| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Mounting Sony RM X60M remote control - need some ideas https://www.smwebhead.com/phpBB3/viewtopic.php?f=21&t=8801 |
Page 1 of 1 |
| Author: | blue dragon [ Sat Feb 11, 2012 8:12 pm ] |
| Post subject: | Mounting Sony RM X60M remote control - need some ideas |
So I bought one of these on fleebay thinking it was a good deal. Turned out to be missing the mounting bracket and screws, along with some sort of ring that goes behind it. (See this link. Now I can get some stainless bolts and screws at the hardware store, and fab up a bracket, but what exactly is the ring that goes behind the remote? Anyone install one of these? I was thinking just use some marine grade silicone behind it to prevent any water from getting through. |
|
| Author: | EvilZ [ Sat Feb 11, 2012 8:43 pm ] |
| Post subject: | Re: Mounting Sony RM X60M remote control - need some ideas |
Yeah, it's just a foam ring to create a "seal". I would think you could cut a foam ring, or use silicone as you suggested - Turns out that's what either my dealer or Four Winns did on mine.... |
|
| Author: | blue dragon [ Sat Feb 11, 2012 9:56 pm ] |
| Post subject: | Re: Mounting Sony RM X60M remote control - need some ideas |
Thanks for confirming! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|